Outside Corner for Moulding Profiles Less than 5 1/2"P and 6 3/4"H, 5 1/2"W x 5 1/2"P x 13 3/4"H Crown Moulding Outside Corner White River Hardwoods

Outside Corner for Moulding Profiles Less than 5 1/2"P and 6 3/4"H, 5 1/2"W x 5 1/2"P x 13 3/4"H

Urethane
$68.45
$68.45 $90.07
Skip to product information
Outside Corner for Moulding Profiles Less than 5 1/2"P and 6 3/4"H, 5 1/2"W x 5 1/2"P x 13 3/4"H Crown Moulding Outside Corner White River Hardwoods
  • Outside Corner for Moulding Profiles Less than 5 1/2"P and 6 3/4"H, 5 1/2"W x 5 1/2"P x 13 3/4"H Crown Moulding Outside Corner White River Hardwoods
  • Outside Corner for Moulding Profiles Less than 5 1/2"P and 6 3/4"H, 5 1/2"W x 5 1/2"P x 13 3/4"H Crown Moulding Outside Corner White River Hardwoods
Outside Corner for Moulding Profiles Less than 5 1/2"P and 6 3/4"H, 5 1/2"W x 5 1/2"P x 13 3/4"H

Outside Corner for Moulding Profiles Less than 5 1/2"P and 6 3/4"H, 5 1/2"W x 5 1/2"P x 13 3/4"H

$68.45
$68.45 $90.07
MaterialUrethane

White River Hardwoods · Urethane Moulding Accessories

Outside Corner Profiles Less than 5 1/2"P and 6 3/4"H

SKU CMO1005-B · 5-1/2″ W × 5-1/2″ P × 13-3/4″ H

Solid Urethane · Factory Primed · Made in the USA

A pre-formed outside corner block that replaces the compound miter at an outside corner. Butt the straight runs into it square, and the corner is done.

No Compound Miters · Factory Primed · Installs with the Matching Moulding

The corner is where crown installations go wrong. A cast corner block makes it the easiest cut on the wall.

Product Details

Dimensions

SKU Height Projection Width Type
CMO1005-B 13-3/4″ 5-1/2″ 5-1/2″ Outside Corner

Why a Corner Block

Two Square Cuts Instead of Four Compound Ones

Square Cuts Only

Straight runs are cut at 90° and butted into the block. No spring angle, no miter saw compound settings, no test cuts.

Profile-Matched

Cast from the same pattern as its moulding, so the relief, height, and projection line up without shimming or filling.

Factory Primed

Primed to match the moulding it pairs with. Paint everything in one pass after installation.

Forgiving of Out-of-Square Rooms

Walls rarely meet at a true 90°. A corner block hides the variance that a mitered joint would show.

Technical Specifications

Key Facts

SKU

CMO1005-B

Type

Outside Corner

Height

13-3/4″

Projection

5-1/2″

Width

5-1/2″

Pairs With

See title

Material

Solid Urethane

Made In

USA

Installation

Step by Step

1

Set the Block First

Position the corner block, check it with a level in both directions, and fix it with construction adhesive and two finish nails.

2

Cut Runs Square

Measure from the face of the block to the next block or wall end. Cut the moulding at 90°.

3

Butt & Fasten

Slide the run into the block, adhesive on the mating edge, and nail or screw into framing every 16″.

4

Fill, Caulk, Paint

Fill nail holes, caulk the block-to-run seam and ceiling and wall lines, then paint block and moulding together.

Trade Program

38% Trade Discount for Design Professionals

Architects, interior designers, builders, and contractors receive 38% off list on urethane mouldings and accessories. Apply once and your account is set for every order.

Apply for Trade Access

CMO1005-B — Outside Corner. White River Hardwoods urethane mouldings.

You may also like